//ICC-AVR application builder : 2007-06-27 ¿ÀÈÄ 5:20:51
// Target : M128
// Crystal: 16.000Mhz

#include <iom128v.h>
#include <macros.h>
#include <KTM128.h>

void port_init(void)
{
 PORTA = 0x00;
 DDRA  = 0x00;
 PORTB = 0x00;
 DDRB  = 0x00;
 PORTC = 0x00; //m103 output only
 DDRC  = 0x00;
 PORTD = 0x00;
 DDRD  = 0x00;
 PORTE = 0x00;
 DDRE  = 0x00;
 PORTF = 0x00;
 DDRF  = 0x00;
 PORTG = 0x00;
 DDRG  = 0x00;
}

//call this routine to initialize all peripherals
void init_devices(void)
{
 //stop errant interrupts until set up
 CLI(); //disable all interrupts
 XDIV  = 0x00; //xtal divider
 XMCRA = 0x00; //external memory
 port_init();

 MCUCR = 0x80;
 EICRA = 0x00; //extended ext ints
 EICRB = 0x00; //extended ext ints
 EIMSK = 0x00;
 TIMSK = 0x00; //timer interrupt sources
 ETIMSK = 0x00; //extended timer interrupt sources
 SEI(); //re-enable interrupts
 //all peripherals are now initialized
}
void main()
{
	int i;
	//¾Ö³ëµå
	unsigned int str[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,
						0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e};
						
	init_devices();
	while(1){
		DDRB=0xff;
		DDRD=0xff;
	
		for(i=0;i<16;i++){
		
			PORTB=0xff;
			PORTD=str[i];
			delay(500);
			}
		}
}